Here's the populated board with all flying leads attached looking for a home. The circuitry for each stage follows in order and parallels the tube placement so there will be a minimum of crossing wires and nothing is close that can't run together.
In the interest of a neat layout nearly everything mounts to the board. The tone control network will mount on the back of the pots, very simple and neat and the signal from the tone and volume will run directly to the next tube stage through a shielded lead.
Grounds for the preamp section are all grouped and run together to the common buss at the main filter / decoupling cap.
Next we get the chassis drilled, hardware mounted and start with the off-board wiring.
No comments:
Post a Comment